How To Hang Heavy Pictures Without Nails? - 6 Easy Solutions
Back when people used nails to hang heavy paintings, they would often damage the walls by creating large, ugly dents in them by using nails. Luckily, there are now ways to hang heavy paintings without nails.
Each of these alternatives allows you to set up your heavy pictures on the wall without causing any harm. So let's get started!
List of 6 ways to hang heavy pictures
1. Use strips
It is possible to hang even very hefty artwork without nails if you have picture hanging strips. These 3M Command Strips, for instance, can support artwork weighing up to 16 pounds (7.26 kg). It is simple to use this method to hang a big picture. The strips were readily available in hardware, supply, hobby shops and online. However, when using this method, it may be necessary to remove the wall covering before removing the heavier pictures.
The following are the measures to take when using these hanging strips to hang a big picture:
- To avoid damaging the wall when hanging the big picture, take-down any hooks or nails you see.
- The reason behind that picture is its hanging strips are adhesive and need a smooth, clean surface to adhere to.
- Any protruding hardware should be pried off the back of the image.
- Cables, nails, sawtooth fasteners, screws and anything else that creates a rough transition between the wall and the picture will be removed.
- When you're done clearing the surfaces, give them a good cleaning.
- The aim is to ensure that the wall and the back of the hefty painting are as clean and smooth as possible. Using isopropyl alcohol and a clean cloth is great to get the job done.
- Once the walls and ceiling are dry, you may apply the image hanging strips.
- Each strip used in this process should have its opposite sides pressed together. It's time to take out the liners. Image mounting glue should be pressed into the back of the picture for at least 30 seconds. This process should be repeated until all strips required for hanging have been attached.
- After you've applied the picture hanging strips to the wall, hang the picture.
- Start by peeling off the strip's liner(s). Put the image flat against the wall and push.
- To separate the strips on the picture from the ones you affixed to the wall, separate the two sets of strips.
- To achieve this, carefully drag the photograph's bottom corners as you lift it. With your fingertips, the strips should be pressed on the wall for around 30 seconds.
- Please wait an hour before proceeding.
- You may re-mount the artwork on the wall at that point by re-using the adhesive strips.
- Since the weight ratings of the pictures vary, there is no "one size fits all" picture hanging strip. Before beginning, please read the directions carefully because each stip has its weight restriction.
2. Use adhesive hooks or nails
This option is one of the best ways to get pictures on your walls. You don't even have to drill holes into the wall to do it. Go to a home improvement store and buy some adhesive hooks or nails.
The thing with self-adhesives is that they're a simple and effective way to hang heavy pictures without damaging the wall. They come with adhesive parts designed to stick to walls, and you can hang heavy pictures like mirrors, paintings, clocks, etc., without worrying about damaging the wall.
You can choose either adhesive hooks or nails, depending on the type of picture you want to hang. If you want to hang something heavy, like a mirror, you'd probably want to go with adhesive hooks. On the other hand, if you wanted to hang something light, like a painting, you could go with a single nail.
Another thing to remember here is the actual weight of the object you're hanging. For example, if you've got a large clock, you might consider buying extra adhesive nails or hooks to ensure everything stays.
3. Use press-in nails or hooks
Press-in hooks are another smart solution for hanging heavy pictures. These handy little devices hang pictures up to 150 pounds (68.10 kg). They work like magic. You insert the hook into the walls and hang pictures on walls. Unlike nails, there's no damage to the cork walls. And unlike screws, there's nothing to drill into the wall art.
The press-in hook uses a spring-loaded mechanism to hold it firmly against the textured wall. This ensures that the picture's weight capacity doesn't pull the device out of the textured wall. Your wall will be dirt-free, smooth walls. Ensure that your picture's weight comes under the weight limits of the press-in nails or hooks you use. If you want to remove the picture later, push it down on the end of the hook, and the picture will come off easily.
Also, since no holes are drilled into the wall art, you won't have to worry about water getting inside the wall.
There is one drawback, though. You'll need to cut a hole slightly larger than the diameter of the hook. In some cases, you might even have to cut several small holes around the perimeter of the picture. But don't worry; it's easy to do. Follow the instructions carefully, and you'll soon have a beautiful piece of art hanging in your home.
4. Use double-sided tape
Double-sided tape is great for hanging things up. You can attach anything from adhesive pictures to posters, clothespins, and almost anything else. This type of tape is perfect for wallpapering rooms, too. But sometimes, you'll need something that holds up better than just regular adhesive tape. And that's where double-sided tape shines.
This stuff is strong enough to hold up heavier objects like paintings and mirrors and won't pull off easily. Plus, it's easy to apply because it doesn't require much pressure. Just make sure you're careful about how you handle it. If you accidentally touch the wrong side of the tape, it could stick to your hand and cause problems.
Don't worry about overlapping if you need to put more than one piece of tape on a surface. Just keep applying pieces until you've covered the entire area. When you're done, let each layer dry completely before adding another.
5. Consider using rails or guides
The term "guide rail" refers to the metal picture frame on walls. They are usually used in art galleries and museums to display paintings. If you want to hang a large piece of artwork on the accent wall art, you'll need to use a guide rail. This is because there isn't enough space to hold the painting directly against the wall.
Guides aren't just limited to hanging artwork. They can also help you decorate your home. For instance, you could put one over a fireplace mantelpiece. Or you could even use them to make a statement in your living room.
You can also use guide rails to hang things like mirrors. Just place the mirror on the rail and then attach screws to secure it.
In addition, you can use guide rails to mount shelves too. To do this, you screw the shelf into the guide rail.
Guide rails come in different sizes. Some are designed specifically for artwork, while others are meant for general hanging purposes.
If you want to hang something heavy, such as a chandelier, you might need to consider installing a special type of guide rail called a "railing." These rails are often found in homes where people want to hang artwork, furniture, or other decorative items.
6. Embrace the wall lean.
We've always been pretty good about hanging things on the brick wall, but we never really thought we could use the extra wall space to display some of our artwork. Sure, We've stuff on the wall before, but now we've found a new way to utilize those pesky blank spaces.
Moreover, if you want to hang a heavy mirror on walls without nails or drilling, you can read our blog post to learn more about it.
Contents